When there is a heavy rain the water puddles in areas and runs across part of the patio. Mark the cut lines with a pencil and a straight edge.
Apply mortar to the exposed cement around the perimeter of the patio and set pavers directly on top.
How to cover a concrete patio with pavers. Let the glue dry for a few hours before you tamp the field pavers and sweep sand across the patio to fill the joints. The patio has a stone wall on one side and the water collects in area against the wall. The patio is concrete cover with porcelain tiles.
Set the pavers on top of the paver base. Lay a row of pavers across the length of the patio and lay another row across the width of the patio to determine if any pavers require cutting. Want a more permanent cover up idea.
Spread a coat of paver base on the patio leaving about 8 inches of the perimeter of the patio free of the paver base. If the pavers require cutting use a tape measure to measure the size of the cut. A table saw or demo saw fitted with a diamond blade can be used to cut pavers to fit if necessary.
Use pavers to cover your concrete patio. Give a tile facelift to an ordinary patio from diy network. Lay the pavers one by one over the sand and tap them into place with a rubber mallet.
Leave a base free perimeter of about 8 inches or one row of pavers around all patio edges. While these can be the same material as the thin pavers in the center of the patio they must be about 1 inch thicker. Family handyman has a complete step by step for you on how to cover a concrete patio with pavers.
You ll need to spread mortar directly on the concrete there. Spread a thin layer of paver base on the concrete. If your patio is cracked consider placing a layer of weed defense fabric on the concrete before you spread the paver base.
Scrape away the excess sand and cut off the excess landscape fabric with a utility knife. Glue down the last border patio blocks. Use tile to cover a concrete patio.
Lay the field pavers over concrete as you would on any paver patio. Measure the width of the border pavers. Is there a way to drill drainage holes in an existing partically cover patio.
Step by step photos and a full tutorial. Mark a chalkline around the perimeter. Spread polymeric sand over the pavers and spray water over the sand to set it.